This is a 110v single phase 1.5 kW electric powered worm pump with a rubber stator and a stainless steel rotor; all the parts in contact with the material are made from stainless steel, so it is ideal for water based materials. This is also well tried and tested technology. Like the other textured material machines, the HAMA requires compressed air injected into the spray gun to blast the material into a spray. This HAMA machine can also be used to spray plaster, especially premixed plaster in plastic bags and can be fitted with a bag roller.
The drive shaft has 3 speeds via a quick adjust pulley.
| Max flow: | 8 litres/min (Also 2 and 4 litres ) |
| Weight: | 82 kgs (181 lbs) (when fitted with a bag-roller) |
| Max grain size: | 5 mm |
H640 compressor
HAMA provides a special compact high output compressor, the H460 which is specially built for the MC3V, with a 2.2 kW 110v motor; it runs continuously with an unloader to avoid high start/stop current surges.
| Max air: | 450 litres/min (16 cfm) |
| Max pressure: | 8 bar (120 psi) |
| Weight: | 69 kgs (152 lbs) |
Equipment for textured coatings
President10:1
Hopper gun
Spraying plaster
Graco MkV Proconnect