Equipment for spraying commercial buildings
Graco Ultramax II 695
Graco
Ultramax II 1095
Graco
Ultramax ProConnect MkV
These units have full electronic pressure control which gives a smooth spray with both the lightest and heaviest materials. Their features and benefits include:
Features / Benefits:
- Superb pressure control - Microprocessor digital motor control to provide a smooth spray throughout the pressure range, from light stains and varnish through to heavy masonry paints
- Watchdog™ - Switches off the pump if the paint or solvent runs out. This prevents damage to the packings
- Autoclean™ - Allows the painter to reverse flush the system unattended (the spraygun is plugged into the filter housing and clean water or solvent is pumped back through the gun, hose and pump)
- High pressure - The maximum pressure at the pump for these units is 3,300 psi (227 bar)
- Quick valve clean - Valves can be quickly accessed with just a hammer to clean out any dirt
- Easy servicing - The pump packings are self adjusting and the sleeve slides out without needing an extractor
- Long life motors - The DC brushless electric motors are fully enclosed to keep out paint spray and dust
- Digital display - Of pressure, volume of fluid pumped, and fault diagnostics
- ProConnect - The UltraMax II 1095 and MkV have quick-change fluid sections
- Voltage - Units are available in either 110v or 230v and are CE marked
- Sturdy cart - Each unit is mounted on a sturdy cart made from chrome plated steel tube and fitted with large semi-pneumatic wheels for easy of manoever on work sites. The cart handle can be retracted to reduce the space and has a large hose rack
- Each Graco UltraMax™II airless unit is supplied complete with a Contractor II airless gun with a RAC V reversible spray tip and 50' (15m) of textile braided hose (except the MkV which has a 3/8" hose setup)