A powerful airless unit specifically designed for heavy coatings.
Features include:
- A 5.5hp Honda petrol engine, so it can be used on sites where electric power is not available as is often the case when spraying intumescent in the early life of a building project
- Extra large inlet valve located just above the suction strainer and close to the bottom of the pail
- Electromagnetic clutch powered from a small generator built into the engine,/li>
- Pressure control managed by a microprocessor that anticipates when the clutch needs to be engaged
- Speedy access to the valves to clear debris
- Self adjusting packings and a pump sleeve that slides out without requiring an extractor for easy servicing
- Unique Autoclean™ feature that reverse flushes the system through the spray gun plugged into the base of the filter housing
- "Watchdog™", a pump safety feature, will switch off the pump if it runs out of liquid
The Gmax™ II 5900HD is supplied complete with a 50' (15m) 3/8" textile braided hose, 6' (1.8m) whip hose, heavy duty gun and 2 x HD RAC reversible spray tips.
Supports up to a single gun with a 43 thou' spray tip, 2 guns each with 29 thou' tips or 3 guns with 23 thou' tips.
Maximum flow 1.3 Igpm (6.0 lpm), weighs 139 lbs (64 kgs).